PhoenixMiner 5.9d (AMD & NVIDIA): Download miner ETH, ETC, Muiscoin, EXP, UBQ
PhoenixMiner is a fast, possibly the fastest Ethash ETH, ETC, Muiscoin, EXP, UBQ miner. A miner that supports AMD and Nvidia cards, including mixed farms. PhoenixMiner also supports Ubqhash for UBQ mining, ProgPOW for BCI mining and dual-mining Ethash / Ubqhash with Blake2s. Phoenix speed is generally faster than Claymore’s Ethereum miner in eth only mode, we measured a speed improvement of about +0.4-1.3%, but your results may be slightly different and be lower or higher depending on your hardware (GPUs). To achieve the highest possible speed on AMD cards, you need to manually adjust the GPUs tuning factor (a number from 8 to 400, which can be changed interactively using the + and – keys while the miner is running).
- Works under Windows x64 and Linux x64.
- DevFee = 0.65%.
What’s new in PhoenixMiner 5.9d?
- The name of the video card manufacturer is now displayed in the device list for easy identification.
- Added support for the latest AMD drivers for Linux (21.40.1). There are still some bugs in these drivers, especially on older cards (RX4x0/RX5x0/Vega/RadeonVII). They can not set the frequency and voltage correctly.
- Support for the latest versions of AMD Windows drivers up to 21.11.2 is confirmed.
- Fixed problems with AMD RX6700XT cards with latest AMD drivers in Linux.
- Fixed problems with AMD Vega and Radeon VII cards in the latest driver versions for Windows and Linux.
- Fixed bug with very old Nvidia drivers (3xx.x).
- Other fixes and minor improvements.
The list of known problems (driver incompatibilities, etc.) and workarounds has been updated:
- There is a bug in the AMD Linux 21.40.1 driver which prevents the correct frequency and voltage settings on older cards (RX4x0/RX5x0/Vega/RadeonVII). Considering that these drivers are also usually slower than older drivers for these cards, we recommend using Linux 20.30 drivers for all devices older than the RX6000 series.
- If you are using Linux drivers 21.40.1 with Radeon VII cards you must add the -fpwm1 parameter to be able to control the fans properly.
- The AMD Linux 21.40.1 drivers have finally eliminated the PCIe Atomics requirement, but problems arise when you try to mix Polaris (RX4x0/5×0) and Vega cards or newer devices on the same farm.
- Some Nvidia cards report a large number of outdated orbs in Windows 11. Using the same driver version in Windows 10 solves the problem.
PhoenixMiner Hashrate:
- AMD Rx 580: 30-32 Mh/s
- AMD Rx 570: 29-32 Mh/s
- AMD Rx vega: 43-45 Mh/s
- Nvidia 1080 TI: 32-55 Mh/s (with tablet)
How do I get started with PhoenixMiner?
Step 1. Load the miner
Once the download is complete, extract the contents of the .rar / .zip file. In the folder containing the miner, you must create or edit a file with the extension .bat. You can do this in any text editor (e.g. Notepad). When saving the file, it is important to select “All files” as the file type, not “txt”. Otherwise there will be .bat.txt at the end of the file name, and the miner will not be able to open the file. Your bat file (let’s say it’s called 1_Ehereum-nanopool.bat) should contain the following text (step 2):
Warning. For security reasons, Windows may not allow you to open the bat file. In this case you should allow it to open in a popup window.
Step 2. Enter the following command:
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 PhoenixMiner.exe -epool eth-eu2.nanopool.org:9999 -worker YOUR_RIG_NAME -wal YOUR_WALLET ADDRESS -pass x
Step 3. Configure the miner with your settings
- WALLET_ADDRESS – enter the address of YOUR Ethereum wallet (this is how PhoenixMiner Miner knows where to put your ETH)
- RIG_NAME – you can choose any name (for example, test), but don’t exaggerate: it should be maximum 32 characters, contain only letters and numbers (no special characters like $% “*; @).
Step 4: Start mining. Double-click on the .bat file to start the miner.
The miner will launch, run setx commands to set these environment variables, initialize each of your GPUs, create a DAG file on each of your GPUs, and start hashing. Let it run for about 20 seconds and then press “s” to display the hashing rate. If you have followed the steps above, you should see this screen.
![phoenix miner 5.9 download](http://crazy-mining.org/wp-content/uploads/2021/11/phoenix-miner-5.9d-bez-nazvaniya-1024x814.png)
Here are the command line parameters for some of the most popular pools and coins:
- Setting up for Binance Pool
PhoenixMiner.exe -pool ethash.poolbinance.com:8888 -wal username1 -worker worker_name -epsw x -asm 2 -dbg -1 -allpools 1 -mode 1 paus
- ethermine.org (ETH):
PhoenixMiner.exe -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal YourEthWalletAddress.WorkerName -proto 3
- ethermine.org (ETH, secure connection):
PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal YourEthWalletAddress.WorkerName -proto 3
- ethpool.org (ETH):
PhoenixMiner.exe -pool eu1.ethpool.org:3333 -pool2 us1.ethpool.org:3333 -wal YourEthWalletAddress.WorkerName -proto 3
- nanopool.org (ETH):
PhoenixMiner.exe -pool eth-eu1.nanopool.org:9999 -wal YourEthWalletAddress/WorkerName -pass x
- nicehash (ethash):
PhoenixMiner.exe -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal YourBtcWalletAddress -pass x -proto 4 -stales 0
- f2pool (ETH):
PhoenixMiner.exe -epool eth.f2pool.com:8008 -ewal YourEthWalletAddress -pass x -worker WorkerName
- miningpoolhub (ETH):
PhoenixMiner.exe -pool us-east.ethash-hub.miningpoolhub.com:20535 -wal YourLoginName.WorkerName -pass x -proto 1
- coinotron.com (ETH):
PhoenixMiner.exe -pool coinotron.com:3344 -wal YourLoginName.WorkerName -pass x -proto 1
- ethermine.org (ETC):
PhoenixMiner.exe -pool eu1-etc.ethermine.org:4444 -wal YourEtcWalletAddress.WorkerName -coin etc
- nanopool (ETC):
PhoenixMiner.exe -pool etc-eu1.nanopool.org:19999 -wal YourEtcWalletAddress.WorkerName -coin etc
- whalesburg.com (ethash auto-switching):
PhoenixMiner.exe -pool proxy.pool.whalesburg.com:8082 -wal YourEthWalletAddress -worker WorkerName -proto 2
- dwarfpool.com (EXP):
PhoenixMiner.exe -pool exp-eu.dwarfpool.com:8018 -wal YourExpWalletAddress/WorkerName
- miningpoolhub (MUSIC):
PhoenixMiner.exe -pool europe.ethash-hub.miningpoolhub.com:20585 -wal YourLoginName.WorkerName -pass x -proto 1
- maxhash.org (UBIQ):
PhoenixMiner.exe -pool ubiq-us.maxhash.org:10008 -wal YourUbqWalletAddress -worker WorkerName -coin ub
- ubiq.minerpool.net (UBIQ):
PhoenixMiner.exe -pool lb.geo.ubiqpool.org:8001 -wal YourUbqWalletAddress -pass x -worker WorkerName -coin ubq
- ubiqpool.io (UBIQ):
PhoenixMiner.exe -pool eu2.ubiqpool.io:8008 -wal YourUbqWalletAddress.WorkerName -pass x -proto 4 -coin ubq
- minerpool.net (PIRL):
PhoenixMiner.exe -pool pirl.minerpool.net:8002 -wal YourPirlWalletAddress -pass x -worker WorkerName
- dodopool.com (Metaverse ETP):
PhoenixMiner.exe -pool etp.dodopool.com:8008 -wal YourMetaverseETPWalletAddress -worker Rig1 -pass x
- minerpool.net (Ellaism):
PhoenixMiner.exe -pool ella.minerpool.net:8002 -wal YourEllaismWalletAddress -worker Rig1 -pass x
- etherdig.net (ETH PPS):
PhoenixMiner.exe -pool etherdig.net:4444 -wal YourEthWalletAddress.WorkerName -proto 4 -pass x
- etherdig.net (ETH HVPPS):
PhoenixMiner.exe -pool etherdig.net:3333 -wal YourEthWalletAddress.WorkerName -proto 4 -pass x
- epool.io (CLO):
PhoenixMiner.exe -pool eu.clo.epool.io:8008 -pool2 us.clo.epool.io:8008 -worker WorkerName -wal YourEthWalletAddress -pass x -coin clo -retrydelay 2
- baikalmine.com (CLO):
PhoenixMiner.exe -pool clo.baikalmine.com:3333 -wal YourEthWalletAddress -pass x -coin clo -worker rigName
Command line examples for dual mining:
- ETH on ethermine.org ETH, Blake2s on Nicehash:
PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal YourEthWalletAddress.WorkerName -proto 3 -dpool blake2s.eu.nicehash.com:3361 -dwal YourBtcWalletAddress -dcoin blake2s
- Nicehash (Ethash + Blake2s):
PhoenixMiner.exe -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal YourBtcWalletAddress -pass x -proto 4 -stales 0 -dpool blake2s.eu.nicehash.com:3361 -dwal YourBtcWalletAddress -dcoin blake2s
- ProgPOW command-line examples:
BCI on BCI-Server:
PhoenixMiner.exe -pool eu-1.pool.bci-server.com:3869 -wal YourBciWalletAddress.Rig1 -coin bci -proto 1
Post Comment