WildRig Multi 0.20.0.2 / 0.20.0.3 beta (miner for AMD GPUs) – This is a further development of the original WildRig miner, with the addition of support for new algorithms, Only for AMD GPU!
- DevFee 2%.
- OS Support: Windows 7/10, Linux.
- unlocked 1% dev-fee for mtp-tcr
- increased a bit hashrate for mtp and mtp-tcr on RX cards
- added parameter –split-job(should be useful for mtp-tcr)
- should be better poolside hashrate for mtp-tcr
- implemented mtp and mtp-tcr algorithms(Radeon 5700/5700XT support it too)
- new parameter –opencl-less-cpu-load
Important! Developing almost all of these algorithms that WildRig Multi supports is not the same as mining Cryptonight or Ethereum. These algorithms are more energy intensive and work intensively with the kernel, especially something like x16r.
Therefore, make sure that your power supplies are reliable enough, the GPUs are stable and the voltage for them is set correctly. Low core voltage does not work here in most cases. If you get instability – start from the warehouse and find the optimal settings.
The default Dev-Fee is 2% and can be reduced.
The wildkeccak algorithm is 2% unchanged.
- GCN2nd gen: R7 260, R9 290, R9 295X2, R7 360, R9 390
- GCN3rd gen: R9 285, R9 380, R9 Fury, R9 Nano
- GCN4th gen: RX460, RX470, RX480, RX550, RX560, RX570, RX580, RX590
- GCN5th gen: Vega 56, Vega 64, Radeon VII(but need some changes for better performance)
Pitcairn, Tahiti and other old 1st GCN cards generations (such as HD 78 × 0, HD 79 × 0, R7 265, R9 270, R9 280, R9 370 and etc.) Are not supported and will not be, because they are too old and need to be finalized.
SUPPORTED ALGORITHMS and BENCHMARKS:
Checked on cards with automatic parameters:
OS: Windows 7; Drivers Used:
- 19.2.3 Cards are modified this way (using OverdriveNTool 0.2.8):
- R9 290X: XFX R9 290X DD 4GB, stock clocks(1000Mhz/1250Mhz)
- R9 380X: Sapphire R9 380X NITRO 4Gb, stock clocks(1040Mhz/1500Mhz)
- RX550: ASUS RX550 2Gb, stock clocks(1183Mhz/1750Mhz), timings from 1500 strap(Hynix)
- RX560: MSI RX560 Aero ITX 4Gb, stock clocks(1196Mhz/1750Mhz), 925mV core voltage, timings from 1500 strap(Hynix)
- RX570: GIGABYTE RX570 GAMING 4Gb, stock clocks(1244Mhz/1750Mhz), 950mV core voltage, timings from 1500 strap(Elpida)
- RX580: SAPPHIRE RX580 PULSE 4Gb, stock clocks(1340Mhz/1750Mhz), 1025mV core voltage, timings from 1500 strap(Elpida)
- RX590: SAPPHIRE RX590 NITRO+ 8Gb, stock clocks(1560Mhz/2100Mhz), 1050mV core voltage, custom timings(Hynix)
- Vega 64: ASUS Vega 64 8Gb, stock clocks(1630Mhz/945Mhz), 1000mV core voltage. While mining it drops clocks to 1530/945
Starting with version 0.15.2, the options —opencl-threads and —opencl-launch install automatically when installing auto. If you want to try other values to find probably the best performance you you can start with the values shown below each initialization line GPU. E.g. the lines below means —opencl-threads 2 —-opencl-launch 21 × 0. —Opencl-launch consist of Intensity x Worksize.
- Some algorithms can grow if you use the –opencl-threads parameter set to 2 or even 3 (for example, phi and skunkhash, but it may be unstable)
- Higher intensity is not always more hashrate, try more and less than auto
- Try a different working size, for example 64 or 128 instead of the usually used 0 (same as 256).
Other miner versions WildRig Multi:
Full list of available versions:
- WildRig Multi 0.19.0 miner for AMD GPUs (Download)
- WildRig Multi 0.18.0 miner for AMD GPUs (Download)
Recommended Related Articles:
- [NoDevFee] How to disable DevFee (commission) in the miner
- OverdriveNTool — tool for AMD
- OhGodAnETHlargementPill – Tablet for mining GTX 1080, GTX 1080 Ti (DOWNLOAD)
- AMD Radeon Vega 56 / Vega 64 Step-by-Step Setup
- ATIFlash / ATI WinFlash 2.8.4 — BIOS Editor AMD
- SRBPolaris V3.5 – Program for editing BIOS on AMD RX4XX and RX5XX cards
This post is also available in: Русский