CryptoDredge v0.22.0 (+X16RV2) (Download and Configure for Windows)

CryptoDredge v0.20.2 (Nvidia GPU Miner)

GitHub: Download CryptoDredge v0.22

CryptoDredge v0.22.0 (+X16RV2)

CryptoDredge v0.22.0 (Download and Configure). CryptoDredge New stable miner with various optimization technologies. CryptoDredge pays great attention to sustainable power consumption. These advantages, as well as a small commission, make this miner one of the best publicly available.

DevFee — 1%, 2% для MTP)

Changelog v0.22.0

  • New X16RV2 algorithm
  • Fix Stratum issue related to ‘resource deadlock would occur’
  • Fix ccminer API on Linux
  • Other minor fixes

System requirements:

  1. The latest version of the program requires the latest drivers from Nvidia.
  2. NVIDIA Graphics Cards with Support for CUDA 5.0 or Higher (Maxwell, Pascal Architecture)
  3. Windows 7 / 8.1 / 10 (64-bit systems only)
  4. Visual C ++ Redistributable Package for Visual Studio 2015 – You can download it from the official Microsoft website:

Supports Algorithms:

  • Argon2d250
  • Argon2d4096
  • Argon2d-dyn
  • Bcd
  • Allium
  • Bitcore
  • HMQ1725
  • Lyra2REv3
  • Lyra2vc0ban
  • Lyra2Z
  • Lyra2zz
  • MTP
  • NeoScrypt
  • PHI1612
  • PHI2
  • Pipe
  • Skunkhash
  • Tribus
  • X16R
  • X16RT
  • X16S
  • X17
  • x21s
  • X22i
  • Cryptonight Fast2
  • Cryptonight Haven
  • Heavy Сryptonight
  • CryptoNightSaber
  • Cryptonight V8
  • GPU Cryptonight
  • CryptoNight LiteV1
  • cuckARoo29
  • CuckooCycle
  • Cuckaroo29s
  • Chukwa
  • Chukwa WRKZ
  • CryptoNightConceal

Fast start

  1. Download program
  2. Unzip to any convenient place
  3. Set up a .bat file and run it

Setting up a batch file for Luxcoin

Decryption of the contents of the .bat file

CryptoDredge настройка для майнинга luxcoin phi2 ryptoDredge
  1. The title argument of the program. In him The title is indicated at your discretion. We indicate the coin, pool and algorithm for easy tracking
  2. CryptoDredge is the name of the program to run. Do not change, otherwise CryptoDredge will not start. Please note that the .bat file must be located in the program folder
  3. -a phi2 mined coin algorithm. For LUXcoin we write phi2. And for the GINcoin coin, on the Lyra2Z algorithm, we would specify -a lyra2z
  4. -o address of the pool you selected
  5. :6667 pool port. It is indicated after the colon. Please note that on many pools, different algorithms have different ports
  6. -u your digital wallet address
  7. c=LUX mined coin token, if not specified, the pool may not understand which coin you want to mine

At this basic configuration of the program can be completed. Starts the .bat file from the folder with the unzipped program by double-clicking.

If you have never used this program before, you should reduce overclocking video cards and testing the miner for stability. Various programs work with different overclocking cards.

Advanced setup

-a, —algo indicates a coin algorithm. (supported: allium, blake2s, lyra2v2, lyra2z, neoscrypt, phi1612, phi2, skein, skunkhash)

-d, —device indicates which devices will be be used. By default, all available devices are used. If you want to use only video card No. 2 and No. 3, then specify with a comma: -d 2,3

-i, —intensity indicates the intensity of mining. Available values are from 0 to 6

—log Allows you to log the event file

—no-color Allows you to turn off the color of the lines

—no-watchdog allows you to disable the watchdog program

—cpu-priority Set process priority in the range from 0 (lowest) to 5 (highest) (default: 3)

—api-type Specify the type of API to use. Supported Values: ccminer-tcp (TCP) (default) ccminer-ws (WebSocket) off

-b, —api-bind IP: port for miner API, 0 disabled (default:

—retries (number) of retries when the network call fails (default: retry the connection endlessly)

—retry-pause (number) pause time between repetitions in seconds (default: 15)

—timeout (number) network timeout, in seconds (default: 30)

Problem solving

Rejected Balls

There are many reasons for rejected balls. Main reasons:

  1. high network latency
  2. overloaded server
  3. aggressive overclocking

Problems with Lyra2REv2

If you have problems with the current implementation of Lyra2REv2 (lyra2v2), you can try lyra2v2-old. eg:

CryptoDredge -a lyra2v2-old -o POOL -u YOUR_WALLET

The program crashes or does not start

The most common problem is the incorrect configuration of the .bat file.

Here is a list of possible solutions to problems:

  1. check the syntax of the .bat file and append the word pause to the very end. Thus, before closing the program will show what the error is
  2. check how much virtual memory is allocated. If you have 6 graphics cards, set your swap file to 6 * 6300 = 37800 MB.
  3. Check the contacts of all risers. Sometimes it helps to swap PCI-e slots
  4. check the power supply. The program may crash if the video cards do not have enough power from the unit
  5. lower acceleration

Other versions CryptoDredge:

Full list of available versions:

v0.21.0: CryptoDredge v0.21.0 (NVIDIA GPU Miner)

v0.20.2: CryptoDredge v0.20.2 (Nvidia GPU Miner)

Recommended Related Articles:

Leave a Reply

Your email address will not be published. Required fields are marked *