Another Nvidia ETH miner is now available with full LHR unlock – lolMiner 1.50. The miner offers 100% LHR unlock on Nvidia GPUs with LHR V1 and V2 GPUs for all supported algorithms including Ethash and dual mining. It requires Nvidia video driver version 510.x (Linux) or 512.x (Windows) and sudo/admin rights to work correctly. lolMiner 1.50 also comes with an experimental LHR v3 unlock up to ~90% (RTX 3050) and ~92% (RTX 3080 12G) although this can still be a little problematic and not 100% stable, if you run into problems you always you can go back to a more secure ~65% unlock.
lolMiner has only 0.7% commission on Ethash, 1.5% on Autolykos V2 and only 1%+0% commission on dual mining. With that kind of feature set you won’t find a lower one on the market.
100% LHR Unlock on LHR V1 and V2 GPUs. Unlock works on all supported algorithms, including Ethash and dual mining. Requires Nvidia driver version 510.x (Linux) or 512.x (Windows) and sudo / administrator rights!
Added experimental LHR v3 unlock up to ~90% (3050) and ~92% (3080 12G) (enabled by default) Use –lhrv3boost 0 to disable the mode and return to ~65% unlock (see notes below).
If the connection to the pool is lost on the dual mining algorithm, the miner will now stop dual mining to save power and continue running in Ethash-only mode until the connection is restored.
Updated web interface
Fixed a bug in version 1.49 that caused Ergo mining not to run on Nvidia GPUs.
The LHR unlock will start approximately 30 seconds after the miner starts, which makes it possible to start the DAG generation with a delayed OC.
If any of the above requirements are not met, the miner will load the old unlock function 79% and will output a suitable warning method with statistics.
Experimental mode for LHR V3 sometimes seems to be unstable at startup and only a reboot solves this problem – but after the first successful launch it becomes stable – so there is an option to turn it off if you trying to run it too often.
When setting the –lhrv3boost option via a json file, use “LHRV3BOOST” : 1 to set it.
Remember to replace YOUR_ADDRESS with your real wallet address so you can receive coins. Then comes RIG_ID, which is the desired name of the rig.
Assigning unique names is a good idea if you have more than one rig. You can use a maximum of 32 Latin letters, numbers, and the symbols “-” and “_”. For example, rig-1.
How to configure .bat файл
lolMiner.exe --coin (coin name) --pool (pool address) --port (pool port) --user (pool wallet or pool login) --pass (pool password)
The easiest way to start using lolMiner is to configure the program from the command line. Just open a terminal (Linux) or create/edit a ready-made .bat file (Windows)
lolMiner.exe – specify the name of the program that will be launched
–coin BEAM – The –coin parameter determines which coin to mine. lolMiner will pick up the internal settings as the required algorithm.
-pool beam-eu.leafpool.com – after the –pool key, specify the address of the pool.
-port 3333 – specify the port of the pool. You need to find it on the page with the pool, or use the example of ready-made settings at the end of the article
-user 1d2h865b39…d0b21cfe5321b6bgca4 – after the –user key, specify the wallet address or login on the pool. You can open a wallet on any safe and convenient exchange, or put an official wallet from a coin.
.rig0 – put a dot and specify the farm ID. It is needed only to track statistics on the pool.
The long-awaited ClockTuner for Ryzen (CTR) project has now reached version 2.1 RC5. This project has the potential to positively impact the performance of Ryzen processor-based systems with the Zen 2/3 microarchitecture. Before we start a tour of CTR and offer you recommendations, we’d like to touch on the background of it all, the very thing that inspired 1usmus to create this software. There will be no irrelevant information, so we hope you will read absolutely everything . Why are we stating this if it will avoid unusual problems and misunderstandings?
Binance Australia CEO: Regulation will set higher standards in the crypto industry. Leigh Travers noted that the lack of regulatory certainty is causing large financial institutions to stay away from the cryptocurrency industry. CommonWealth Bank of Australia, for example, has suspended its digital asset trading pilot program.
Vitalik Buterin accused the authorities of unfair prosecution of cryptocurrency mining on the Proof-of-Work algorithm. The creators of Ethereum believe that the mining of cryptocurrencies should not be banned, and the ban can become a tool for prosecuting projects objectionable to officials
Binance laundered Hydra and Lazarus money. Reuters reported that from 2017 to 2021, Binance processed at least $2.35 billion worth of transactions related to illegal activities. The agency used court records, law enforcement statements, and blockchain information.
PhoenixMiner 6.2c is a fast, perhaps the fastest, Ethash (Ethereum, ETC, etc.) miner that supports both AMD and Nvidia cards (also in mixed mining rigs). It runs on Windows x64 and Linux x64 and has a developer fee of 0.65% (the lowest in the industry). This means that every 90 minutes a miner will mine for us, its developers, for 35 seconds. PhoenixMiner also supports ETCHash for ETC mining, Ubqhash for UBQ mining, ProgPOW for BCI mining, and Ethash/ETCHash/Ubqhash dual mining with Blake2s .