Bminer 16.0.7: fast Equihash/Ethash/Cuckaroo29 miner for AMD/NVIDIA GPUs

Bminer 16.0.7: fast Equihash/Ethash/Cuckaroo29 miner for AMD/NVIDIA GPUs

DOWNLOAD: Bminer 16.0.7

Bminer 16.0.7 – высокооптимизированный криптовалютный майнер, который работает на современных графических процессорах AMD / NVIDIA (Maxwell и Pascal, то есть на графических процессорах с вычислительной возможностью 5.0 или выше). Bminer – один из самых быстрых майнеров, доступных на сегодняшний день, – мы используем различные методы, в том числе мозаику и конвейеризацию, чтобы реализовать весь потенциал оборудования.

Bminer также поставляется с API-интерфейсами REST для упрощения развертывания продукции (например, майнинг-ферм).

  • Bminer поддерживает майнинг монет на основе Equihash (например, Zcash) с 2% от devfee. Bminer поддерживает майнинг монет на основе Zhash / Equihash 144,5 (например, BitcoinGold, BitcoinZ) с 2% от деви-фая.
  • Bminer поддерживает майнинг монет на основе Ethash (например, Ethereum) с 0,65% от devfee.
  • Bminer также поддерживает режим двойного майнинга – майнинг монет на основе Ethash (например, Ethereum) и монет на основе Blake14r (например, Decred) / монет на основе Blake2s (например, Verge) одновременно.
  • Devfee для режима двойного майнинга составляет 1,3%, а вторая монета (например, Decred / Verge) добывается без devfee.
  • Bminer поддерживает майнинг монет на основе Tensority (например, Bytom (BTM)) с 2% от devfee.

16.0.7

  • Retire the supports for XVG, DCR, and VBK.
  • Initial support for mining Ethash as well as dual mining Ethash and Handshake on AMD platforms.

Быстрый старт

  1. Загрузите и извлеките Bminer в папку (например, C: \ bminer или / home / bminer)
  2. В зависимости от монет, которые вы хотите добыть, найдите соответствующий скрипт в папке.
    • Например, соответствующий скрипт – mine_grin29.bat (в Windows) или mine_grin29.sh (в Linux) при майнинге Grin с использованием алгоритма Cuckaroo29.
  3. Измените адрес и информацию об учетной записи в скрипте.
  4. Запустите скрипт и наслаждайтесь майнингом 🙂

Features Bminer

Fast

  • Grin31 mining on stock settings
    • 2.60 G/s on RTX 2080Ti
    • 1.65 G/s on RTX 2080
    • 1.55 G/s on GTX 1080Ti
    • 0.95 G/s on GTX 1070
  • Bminer 16.0.6 Grin29m mining on stock settings
    • 8.32 G/s on GTX 2080Ti
    • 5.18 G/s on GTX 2070
    • 3.96 G/s on 2060
    • 2.18 G/s on 1060
    • 3.34 G/s on 1070
    • 5.03 G/s on 1080ti   
    • 3.00 G/s on P104-4G
    • 3.56 G/s on P104-8G
    • 4.95 G/s on P102-10G
  • AE mining on stock settings:
    • 11.8 Sol/s on GTX 2080Ti
    • 8.90 Sol/s on GTX 2080
    • 7.40 Sol/s on GTX 1080Ti
    • 4.7 Sol/s on GTX 1070
    • 3.4 Sol/s on GTX 1060 6G
  • Beam mining on stock settings
    • 30 Sol/s on GTX 1080Ti
    • 21 Sol/s on GTX 1070
    • 12 Sol/s on GTX 1060 6G
  • Equihash mining on stock settings
    • 735-745 Sol/s on GTX 1080Ti
    • 450-460 Sol/s on GTX 1070
    • 315-325 Sol/s on GTX 1060
  • Equihash 144,5 (Zhash) mining on stock settings
    • 61 Sol/s on GTX 1080Ti
    • 25 Sol/s on GTX 1060
  • Ethash mining on GTX 1080Ti stock settings (power: 250 W)
  • Dual mining using automatic tuning (default) on GTX 1080Ti stock settings (power: 250 W)
    • With OhGodAnETHlargementPill:
      • ETH 46 MH/s and DCR 1000 MH/s
      • ETH 46 MH/s and XVG 1770 MH/s
    • Without OhGodAnETHlargementPill:
      • ETH 32 MH/s and DCR 2200 MH/s
      • ETH 32 MH/s and XVG 3750 MH/s
  • Bytom mining on stock settings:
    • 4650 H/s on GTX 1080Ti
    • 2850 H/s on GTX 1070
    • 1800 H/s on GTX 1060 6G

Secure and reliable

  • SSL support
  • Automatic reconnects to recover from transient network failures
  • Automatic restarts if GPUs hang

Operation friendly

  • Comes with REST APIs to facilitate production deployments

Release notes


16.0.7 (Current)

  • Retire the supports for XVG, DCR, and VBK.
  • Initial support for mining Ethash as well as dual mining Ethash and Handshake on AMD platforms..

16.0.6

  • Improve the performance of Cuckaroo29m miner.
  • Fix the regression that the Cuckatoo / Cuckoo miners failed to start.
  • Fix the performance regression of Cuckaroo29m under Windows.
  • Fix the compatibility issues on Windows system.

16.0.5

  • Improve the performance of Cuckaroo29m miner.

16.0.4

  • Improve the performance of Cuckaroo29m miner.
  • Reduce the rejection rate of the Cuckaroo29m miner.

16.0.3 (Current)

  • Improve performance and stability of the Cuckaroo29m miner.
  • Fix fidelity issues of the Cuckaroo29m miner.

16.0.2

  • Performance improvement on the Cuckaroo29m miner.

16.0.1

  • Fix the Cuckaroo29m miner fails to start on Turing-based cards or cards that have only 4G memory.
  • Fix the Cuckaroo29m miner submits shares that have low difficulty.
  • Performance improvement on the Cuckaroo29m miner.

16.0.0

  • Initial support for the Cuckaroo29m algorithm.

15.8.7

  • Improve the performance of Beam bminer for RTX cards.
  • Experimental support for dual-mining Ethash and the Eaglesong algorithm.

15.8.6

  • Improve the performance of automatic tuning of dual mining parameters.

15.8.5

  • Add an API to stop the miner.

15.8.4

  • Improve the performance of BeamHashII algorithm on RTX cards.

15.8.3

  • Improve the performance of BeamHashII algorithm.

15.8.2(Current)

  • Fix the regression on the BeamHashII fails to start on GTX 2060.

15.8.1

  • Support for the BeamHashII algorithm.

15.7.6

  • Fix the regression that the Cuckaroo29d miner fails to start on RTX-series cards.

15.7.5

  • Improve the performance of the miner of Cuckatoo31.
  • Increase the dynamic ranges of -intensity for older machines to fully utilize the GPUs (at the cost of a slight performance loss).

15.7.4

  • Improve the performance of Cuckaroo29d / Aeternity.
  • Support 4GB cards for Cuckaroo29d.
  • Fix the regression that the Cuckaroo29d miner fails to start on Windows.

15.7.3

  • Improve the performance of the Cuckaroo29d miner.

15.7.2

  • Improve the stability of the Cuckaroo29d miner.
  • Reduce the CPU usage of Cuckaroo29d miner.
  • Support 5GB cards for Cuckaroo29d.

15.7.1

  • Improve the performance of the Cuckaroo29d algorithm.
  • Fix the issue that the Cuckaroo29d failed to start for Turing-based cards.

15.7.0

  • Support the cuckaroo29d algorithm

15.5.3

  • Fix invalid shares ETH + VBK when using multiple cards.

15.5.1

  • Fix the regression that Cuckaroo29 fails to work on Turing cards.
  • Significantly improve the performance of ETH / VBK dual mine.

15.5.0

  • Improve the performance of the Cuckatoo algorithm.
  • Support dual-mining ETH and VBK.
  • Add the parameter -version to output the version and exit.

15.4.0

  • Improve performance of Cuckaroo29 / Aeternity.
  • Improve compatibility on Windows
  • Add an experimental flag –fast to improve the performance for Cuckaroo29 / Aeternity, but it might lead to unstability on some systems

15.3.1

  • Slightly improve performance of Cuckaroo29 / Cuckatoo31.
  • Reduce CPU usages of Cuckatoo31.
  • Fix the regressions of Cuckaroo29 on RTX cards.
  • Fix the incorrect reportings of Ethash speed to the mining pools.

15.3.0

  • Improve the performance of Cuckaroo29 by 5%.
  • Slightly improve the performance of Cuckatoo31.
  • Improve compatibility on Windows.

15.2.0

  • Improve performance and stability of Cuckatoo31.
  • Slightly improved performance of Ccukaroo29.
  • Reduced the chance of reject and stale shares of CC29/CC31.
  • Support RTX 2080/2070 for Cuckatoo31. RTX 2080 expected speed 1.45G/s.

15.1.0

  • Improve performance of Cuckaroo29 / Cuckatoo31.
  • Experimental support Cuckaroo29 on AMD cards (ROCM only)
  • Improve compatibility on Windows.
  • Fix the regression on UI dashboard.
  • Reduce reject rate of Cuckaroo29 / Cuckatoo31.

15.0.2

  • Improve the fidelity of Cuckaroo29 on 1060 / P106 / 1070.

15.0.1

  • Fix compatibility issues on Windows.

15.0.0

  • Support 8G cards for Cuckatoo31 (except for Windows 10).
  • Improve stability of the Cuckatoo31 solver.

14.3.1

  • Improve the performance of Cuckaroo29.
  • Reduce the likelihood of rejected shares of Cuckatoo31.
  • Support Nicehash for both Cuckaroo29 / Cuckatoo31.

14.3.0

  • Improve the performance for Cuckatoo31.
  • Support 2080Ti for Cuckatoo31.
  • Reduce the CPU usages for Grin / Aeternity by default.
  • Reduce the likelihood of rejected shares for Cuckatoo31.

14.2.0

  • Experimental support for Cuckatoo31 on 1080Ti.
  • Fix the regression where ETH dual mine fails to start on Windows.
  • Improve performance on mining Aeternity.
  • Support tweaking the CPU usage for mining AE / Grin with the -intensity flag.

14.1.0

  • Improve performance of AE / Grin on Turing cards.
  • Improve performance of AE / Grin on lower-end CPUs and Windows platforms.
  • Support mining beam on leafpool and nicehash.
  • Fix the regression where /api/v1/devices is occasionally unresponsive.

14.0.0

  • Improved Grin/AE mining speed.
  • Print fidelity information. It is a measure of the luck/miner correctness. Overtime, the number should be close to one. For miners running over two hours, the fidelity should be at least greater than 0.95.
  • Improved multi-card performance on Windows.
  • Improved the miner fidelity by 8%-10%. You will not see big local difference but you will see roughly 10% higher speed on the pool side.
  • Reduced reject chance.
  • Fixed equihash issue.
  • Fix the regression that the equihash miner fails to start on Windows.

13.2.0

  • Improve the performance of Turing GPUs when mining Grin.
  • Reduced rejected share chance for all cards.

13.1.0

  • Support mining Grin / AE with 4G or 5G of video memory. (P104 only on Linux).

13.0.0

  • 30% performance improvement on Grin and AE.
  • Reduce the likelihood of rejected shares.

12.2.0

  • Optimize CPU usage.
  • Fix compatibility issues with grin-pool.org and grinmint.com.
  • Experimental support for Turing GPUs.
  • Allow bminer to run with older NVIDIA drivers.

12.1.0

  • 50% performance improvement on Aeternity.
  • 10% performance improvement on Grin.
  • Support 8GB cards on Windows 10.
  • Support SSL connections for Grin.

12.0.1

  • Experimental support mining Grin on NVIDIA GPUs. Currently bminer only supports the Cuckaroo29 algorithm.
  • 100% performance improvement on the beam miner on NVIDIA GPUs compared to 11.4.1.
  • Bug fixes

11.4.1

  • Support AMD Crimson driver mining beam [/b]

11.4.0

  • Experimental support mining beam with AMD cards

11.3.0

  • Improve the performance of Aeternity for 6GB cards
  • Support mining beam over beepool
  • Output solution/s instead of nounce/s when mining beam

11.2.0

  • Experimental support for Beam.

11.1.0

  • Experimental support for Aeternity.

11.0.0

  • Support ETH/BTM dual mine.

10.7.0

  • Fix `-devices value` option bug in 10.6.0.
  • Fix a bug in `GET /api/v1/status/device` api.

10.6.0

  • Require CUDA 9.2 or above for this version.
  • Substantially increase BTM mining speed, e.g. 4650H/s on 1080Ti now.

10.5.0

  • Require CUDA 9.2 or above for this version.
  • Substantially increase BTM mining speed, e.g. 4500H/s on 1080Ti now.
  • Maximum temperature is monitored more precisely.
  • Support BTG mining on zhash.pro pool.

10.4.0

  • Add `-pers auto` option to support pools (e.g. zergpool.com) to automatically switch personalization string for equihash144,5 mining.

10.3.0

  • Make API robust and accessible even when GPUs are hung.
  • Support ethproxy protocol pools, such as dwarfpool, to display worker names.

10.2.0

  • Support all the other Equihash 144,5 based coins besides BTG, using equihash1445 scheme and -pers config.

10.1.0

  • Fix performance regression in BTM mining.

10.0.0

  • Support mining Zhash (Equihash with parameter set 144,5) based coins.
  • Substantially increase BTM mining speed again (up to another 30%).
  • Support reported hashrate feature on ETH pools.

9.1.0

  • Substantially increase BTM mining speed (up to 30%).
  • Fix editing problems of .bat files on windows.
  • Add scheme suggestions in scripts for ETH mining.

9.0.0

  • Experimental support for mining Bytom (BTM).
  • Optimize the performance of automatic tuning in dual mining mode.
  • Start REST APIs much faster than previous versions.
  • Improve compatibility of mining Ethereum on Nicehash pool.

8.0.0

  • Support a dual mining mode for Ethereum (ETH, Ethash) and Decred (DCR, blake14r) / Verge (XVG, blake2s) without affecting Ethereum mining performance.
  • Automatically tune mining performance in dual mining mode.
  • Support dual mining mode in launcher and dashboard GUI.
  • Add scripts to download third party software OhGodAnETHlargementPill to improve Ethereum mining performance on GTX 1080/1080Ti.
  • Introduce new REST APIs to display stratum/solver/device status.

7.0.0

  • Experimental support for mining Ethereum.
  • Various usability improvements on the launcher GUI.
  • Create a lite distribution without the launcher GUI.

6.1.0

  • Fix potential regression caused by 6.0.0 for GPUs mounting on risers.
  • Improve mining algorithm stability.

6.0.0

  • Failover server supports. Supply multiple uris (separated by commas) via the -uri option to enable the failover support.
  • A launcher GUI for Windows.
  • Reduce reject rate caused by stale shares.
  • 0.3-0.5% performance improvement depending on card models.
  • Fix inaccurate metrics at the start of Bminer.
  • Reduce CPU usage the start of bminer.
  • Support miner.reconnect().
  • Experimental support for miningrigrentals.
  • A new option -no-runtime-info to disable runtime information collection.

5.5.0

  • Show the fan speed in both console and UI.
  • Fix compatibility issues for pool.miningspeed.com.
  • Fix a bug that causes Bminer fails to start on Windows under some configuration.

5.4.0

  • Fix a reconnection issue in the network layer.
  • Show additional statistics in console.
  • Allow cross-domain requests to access the API.
  • Fix the compatibility issue with docker.
  • Introduce the option `-share-check` to make the time of recovering from no accepted shares configurable.

5.3.0

  • Experimental support for EthOS / Ubuntu 14.04.
  • Support AMD K10 CPUs.
  • Automatically restart hanged network connections.
  • Improve compatibilities with mining rigs with more than 8 cards.

5.2.0

  • Introduced the option -logfile to append the logs into a file.
  • Minor optimization on Windows for cards that are mounted on the risers.
  • Improve compatibility for NiceHash.

5.1.0

  • Support NiceHash.
  • Fix unstable network connections in 5.0.0.
  • Fix performance regressions for 1080Ti under Linux.

5.0.0

  • Minor performance improvement for GTX 1060.
  • Fixed performance regressions in 4.0.0 on Windows.
  • Optimization on the networking layer.
  • Show GPU ID in case of hardware errors.
  • Introduced the option -no-timestamps which suppresses the timestamps in the logging messages.

4.0.0

  • Minor performance improvement.
  • Support older CPUs like Core 2 Duo.
  • Support mining rigs that have more than 8 GPUs.
  • Support luckpool.org.
  • Removed the polling option.
  • Introduced the option `-max-network-failures` which allows Bminer to exit after consecutive network failures.
  • Various improvement on the UI.
  • Localization for Russian and Chinese.

3.0.0

  • Minor performance improvement.
  • Disable CPU polling by default.
  • Introduce a Web-based dashboard.
  • Support slushpool.

2.1.0

  • Add the -polling option to make GPU polling configurable.

Disabling polling reduces the CPU usage but it might reduce the performance in some configurations.

  • Improve the stability of the network connections.
  • First public release for Linux.

2.0.0

  • First public release.

Рекомендуемые статьи по теме:

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *