If you like TT-Miner and want to support future developments, please consider donating or my few minutes to one of the following wallet addresses:
TT-Miner supports Ethash mining on Nicehash, as well as:
PROGPOW (Zano, Sero & EPIC)
ETHASH (ETH, ETC, Music, Callisto, etc)
MTP (Zcoin, Tecra)
In the current version, the miner supports cuda 9.2, 10.0, 10.1 and 10.2. If you want to make sure that TT-Miner uses a specific version of cuda, add one of these values, if you do not add any of them, the miner will always use the algorithm for the latest version of cuda:
-92 for cuda 9.20 (ETHASH-92, UBQHASH-92)
-100 for cuda 10.00 (ETHASH-100, PROGPOW-100)
-101 for cuda 10.10 (ETHASH-101, MTP-101)
-102 for cuda 10.20 (ETHASH-102, MTP-102)
Please note the following requirements for different releases of the Cuda Toolkit:
Cuda-Toolkit for Linux Windows
CUDA 10.2.89> = 440.33> = 441.22
CUDA 10.1.105> = 418,39> = 418,96
CUDA 10.0.130> = 410.48> = 411.31
CUDA 9.2.148> = 396,37> = 398,26
An example of starting from the command line might look like this:
TT-Miner.exe -A PROGPOW -P YOUR_WALLET.YOUR_WORKER@POOL_SERVER: POOL_PORT
Starting with version 2.1.5, TT-Miner can understand most of the command line arguments used. If you are already using any miner, everything will be fine, just replace the program name and leave the remaining arguments as they are. If you have a combination that TT-Miner does not understand, please let me know so that I can fix it.
If you are looking for possible command line options, please run the miner with the -h or –help option:
TT-Miner is NOT error free, so if you find one, help make TT-Miner better and let me know so I can fix it
Example bat file:
TT-Miner.exe -A BLAKE2S -coin kda -luck -log -logpool -P YOUR_WALLET.YOUR_WORKER@kda-us.icemining.ca:3700
TT-Miner.exe -A BLAKE2S -coin kda -luck -log -logpool -P https://YOUR_WALLET@NODE_SERVER:NODE_PORT
TradeTec-MinerCmd.exe – indicate in the batch file which program we want to run. This file should be in the same folder as our batch file
PROGPOW-100 – specify the coin algorithm that we are going to mine
iN5h4sGcf1BD7R1mgaqkeGWnDvAubzyEKg – after the construction -P stratum + tcp: // specify the address of our digital wallet. You can take it on the exchange where the coin is traded, or install a cold wallet
rig1 – after we entered the wallet address, put a dot and indicate the name of our farm. You can use any. This is necessary to track statistics on the pool.
bci-eu.coinblockers.com – after the @ sign we indicate the address of the pool.
3910 specifying the address of the pool, put a colon and indicate the port of the pool
—list-devices – the command will display all available mining devices
These are all the necessary commands to run the program. Below is an example with payfrom (payout mode). On some pools, you can adjust the frequency of payments. We have commented on this example with the REM team. If you remove this command, then example No. 2 will be used.
So we set up the program for the first launch. How to run it? The cryptocurrency mining process is launched by double-clicking on the created or edited batch file (file with the .bat extension). So, we launch and look at what the program console writes to us.
TradeTec-Miner – the program reports the installed version
Found 2 CUDA devices – two mining devices available
#0 PCI 0:1 GeForce GTX 1080 Ti (6.1) CoreClk 139 MHz | MemClk 495 MHz | 11264 MB | SM: 28 – name of the video card, overclocked its core and memory, available amount of video memory
bci-eu.coinblockers.com:3910 – the pool that we indicated in the batch file
iN5h4sGcf1BD7R1mgaqkeGWnDvAubzyEKg – address of the wallet to which the extracted coins will be sent
YOUR WORKER – farm name (optional)
Use algo: ProgPoW (Programmatic Proof-of-Work) – we specified the ProgPoW algorithm
CUDA 10.0 – cuda architecture on which graphics cards work
Press ‘Q’ – to stop mining and terminate если нажать клавишу Q в активном окне майнера, то программа закроется
Set nonce generation to mode: 3 — timeout: 0.00 secs. – nonce is set to mode 3. More on this below.
Subscribed to bci-eu.coinbiockers.com:3910 – we were able to connect to the pool
Received new job#: d27a – pool sent a new job for video cards
Pool difficulty update: 0.08 GH – the pool set the difficulty to 0.08 GH. convenient power calculator you will find here
Worker authorized: YOUR WORKER – we logged in to the pool
create new DAG for epoch 6 – DAG file for mining is generated. Need to wait a bit
DAG created in 2.7 seconds – DAG file created in 2.7 seconds
Accepted 86 ms. bci-eu.coinbiockers.com:3910 – The pool made a decision (share) from our video card. The remuneration to the miners is paid precisely for the number of resolved ball.
It takes the miner about 4-5 minutes until he shows a stable hash rate.